Zeep replaced suds but Debian and Rpm packaging were not updated.
Ofxparse is required but did not appear in Debian nor Rpm packaging.

closes odoo/odoo#66780

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

When using the windows installer in French language, the `Hôte` label
used to configure postgresql server does not display correctly.

The LangString documentation does not specify how to use the special
characters but after some tests, specifying a BOM for the nsi file seems
to be the way to go.

closes odoo/odoo#65362

X-original-commit: 3d0871d1
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

The createrepo Debian package is not available in Ubuntu anymore, this
can cause problems on Ubuntu based build systems.

In order to solve that once and for all, with this commit the rpm repo is
generated from a Docker container.

Fixes #63419

closes odoo/odoo#63578

X-original-commit: 8f5c5e58
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

When the Odoo installation is tested, if the test fails an error is
raised but the Docker container is not stopped.

As a result, a ghost container stays alive with a Postgres server
running. Worse, if another package is built on the same host, the
ghost container prevent the other build to succeed.

With this commit, a specific Exception is raised and the container is
stopped in any case.

closes odoo/odoo#56265

X-original-commit: fbe2092d
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

As this file was only used as a one shot for the windows pacakging, it
can be removed from the code.

closes odoo/odoo#54843

X-original-commit: 551587e1bc8a9c6d27be782c7e553189603af3fb
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

When building the package list of the APT repository, dpkg-scanpackages
reports the following and only output the latest package information in
the Packages file:

```
dpkg-scanpackages: warning: Packages with multiple instances but no --multiversion specified:
dpkg-scanpackages: warning: ./odoo_13.0.20191002_all.deb
dpkg-scanpackages: warning: ./odoo_13.0.20191003_all.deb
[...]
dpkg-scanpackages: warning: ./odoo_13.0.20200630_all.deb
```

Having only the latest version listed in the Packages file makes it
impossible to tell apt to use a specific version through apt-pinning.
It also makes it impossible to revert to a previous version if a
regression is caused by an update.

For these reasons, tell dpkg-scanpackages to include all versions of the
odoo package in the Packages file it generates.

closes odoo/odoo#54297

X-original-commit: f41c00a8
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

Werkzeug 0.16.0 is the version we're packaging for all Windows builds,
for 11.0 and later.

closes odoo/odoo#53473

X-original-commit: f4ad0d4f
Signed-off-by: Olivier Dony (odo) <odo@openerp.com>

At 795c7b0a the external dependencies was changed from trying
to import 'ldap' to checking than 'pyldap' package was installed.
The problem is that pyldap is a unmaintained library that should no
longer be used, as explained on the package page:
https://pypi.org/project/pyldap/


"The pyldap fork was merged back into python-ldap, and released as
 python-ldap 3.0.0."

Having pyldap version >= 3.0 installs python-ldap automatically and
will not cause any issue.

The Debian control file package name is adapted to use the latest.

The "ldap" externalm dependency defined in __manifest__.py will cause
pkg_resources.get_distribution() to fail in both case ("python-lap" or
"pyldap"), but the "import" fallback will succeed. For that reason, the
log warning is turned into a log info.

closes odoo/odoo#40249

Note: This library should be replaced by the pure python "ldap3" library.
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

When building the MS Windows package, the PYTHON_VERSION variable is not
used and the WinPython path is hard coded in the Makefile and NSI file.
This prevent the usage of a newer version of Python.

With this commit, the PYTHON_VERSION is used to compute the WinPython
Python directory. That way, this directory can be derived from
package.py command line argument --vm-winxp-python-version.

Also the less windows binaries are not packaged anymore.

closes odoo/odoo#39816

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

closes odoo/odoo#39193

X-original-commit: 25d6e9a6
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

Packaging oversight, the displayed version in the installer window was still
12.0.

closes odoo/odoo#38451

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

Actually, docker is used to test Linux packages once they are built.
The packaging process is done on the host system where package.py is
run.

Consequences:
    * difficult to reproduce an exact same build on another host
    * changing a Debian/Ubuntu target version means some upgrade steps
      on the build host (mix that with the fact that the host also
      could build old Odoo versions)
    * Fedora rpm package is built on an Ubuntu system (which is not a
      real problem but it could be)

With this commit, the package.py utility is refactored to use Docker
containers to build the Gnu/Linux packages.

Also, the Debian package is adapted for Debian Buster, the RPM package
is built based on Fedora 30.

Some minor changes are also made in the windows packaging system.

closes odoo/odoo#37766

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

Use polib library that handles this correctly
The complexity of the parser is moved to the library

The use of polib as introduced in commit 632fa044.
The nightly packaging system uses Docker to test the packages and they need to
be updated when a new library dependency is introduced.

closes odoo/odoo#34117

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

Recommended by GitHub's repository alerts.

We normally stick as close as possible to the version we depend
on in the official DEB packages. This in turn depends on the version of
Debian stable at the time of release - for 11.0 that would be Debian 9
(stretch) and thus Jinja 2.8 (with security backports).

However Jinja2 before 2.10.1 suffers from a few issues that could lead
to crashes of Odoo processes.

It seems it's worth an exception to our rule for pip users, similarly to
previous bump up at d2605bcc.

closes odoo/odoo#32601

Signed-off-by: Christophe Simonis <chs@odoo.com>

Recommended by GitHub's repository alerts.

We normally stick as close as possible to the version we depend
on in the official DEB packages. This in turn depends on the version of
Debian stable at the time of release - for 11.0 that would be Debian 9
(stretch) and thus Jinja 2.8 (with security backports).

However Jinja2 before 2.10.1 suffers from a few issues that could lead
to crashes of Odoo processes.

It seems it's worth an exception to our rule for pip users, similarly to
previous bump up at d2605bcc.

closes odoo/odoo#32601

Signed-off-by: Christophe Simonis <chs@odoo.com>

- Added new library zeep for soap request.
- Remove old suds library.

Task ID: 41696 Closes #26934

Fedora 29 switched to python 3.7. It seems that there is no official
way to build a RPM package that could works with 3.6 and 3.7.
Building two different packages for each version could open the pandora
box of packaging.

With this commit an ugly hack is used: if python3.7 is found, the odoo
directory is symlinked into its site-packages dir.

fixes #30579

closes odoo/odoo#30618

After the Odoo package is built, the package.py script uses a Docker
image to test the package. After that python3-qrcode was added as a
dependency for the package in 2ff49c5f , it revealed some issues.

A missing cli parameter and a forgotten '&&' in the Dockerfile prevented
the installation of the depending packages.

Also, the script shebang was wrong by launching python2.

Finally, the fact that python3-xlwt is missing in Debian stretch was
highlighted. With this commit, the python3-xlwt is explicitly removed
from the dependencies and the documentation is updated accordingly.

closes odoo/odoo#28807

PKG-INFO is generated during the setup phase and is not needed anymore.
Also this file contains outdated informations.

py2exe is not used anymore to build the windows installer.

closes odoo/odoo#28494

Fixes #27420

closes odoo/odoo#27590

Commit cf853a78 removed all yml tests
and the yml import engine from Odoo forever, however PyYAML remains a
dependency even though it's not used anymore.

This commit removes any reference to this lib that could be found.

closes odoo/odoo#27563

Since 2f7c03d9 the admin user could have any uid and the uid 1 is
reserved for the system user. As the uid was hardcoded as 1 when testing
packages, the tests were failing.

With this commit, the uid of the admin user is searched before testing
the packages.

Closes #26603

Since bf3193ac libsass is needed but is named libsass0 in Debian.
With this commit, the docker source image used for tests will build again.

Since 565277ac sassc is used as a
fallback when the python libsass is not available.

With this commit, the saasc package dependency is added to the rpm to
avoid installing libsass with pip.

Since 285ead28, `base` should be loaded
as a server wide module to enable rpc routes.

When the virtual machine used to build MS Win package takes too much
time (to build or to test the build), a warning is logged and the VM is killed.

Before this commit, the PID of the process was passed as an argument to
the warning method, causing a traceback.

When building the Windows installer, a virtual machine is used with
prepackaged python modules.

With this commit, the packaging script will try to install on the
virtual machine the python packages specified in requirements.txt.
Each package is installed individually, that way, if an install fails,
the install of the other packages continues.
At the end of the process, successfully packages are listed so that they
will appear in the build log files.

Also, the Makefile was cleaned in this commit (removal of py2exe stuffs).

A dependency to libsass was added in debian package and in the docker
file. The Odoo nightly builds of the deb package was failing because
this lib is named libsass0 in Debian.

Finally, this dependency is not required because python3-libsass already depends on libsass0.

Include libsass instead of node-less

Thank you to @d-fence for testing this.

As the windows package provides odoo from sources alongs with
python 3, the test of the build was failing.
The odoo-bin.exe was not found because py2exe is not used anymore.

Windows firewall is now disabled from package.py to prevent it
from blocking local xmlrpc calls.

Also, the docker containers were removed when package tests were
finished, even when no docker was involved in the process (e.g. only
a windows build).

This commit fixes the test part of the windows build process.

Sign CLA

Closes #20321

Nsis installer was installing the wrong MS Visual C++ redistributable
file. Python 3.6 needs MS Visual C++ 2015 redistruibutable files.

Also, Nsis now differentiate Windows architecture for the nssm service
and the MS C++ redist.

The automated tests of rpm,deb and src packages are using docker
images and containers. Those tests were not working as expected due
to various small glitches:
* some debian python- packages were missing in the Debian image
* pip was called instead of pip3 for the src test
* a wrong addons path was given for the tests
* the containers id's were wrong due to a bytes implicitly converted
  to str

Purpose: openid is not used anymore in Odoo, therefore it can be
safely removed.

Use python 3.5
Refer to correct page of the doc
Remove old bazar to git (was intended for the 8.0)

Remove outdated setup_dev script: it was intended for odoo developers but if you
are not able to make a git clone, you are going to have a bad time later.

Not that we really care about compileall, but some people apparently
do.

Fixes #19871

Closes #19849

Purpose:
    The psycogreen module is unmaintained. Last source update was in
    2015 and last pypi package was in 2012. Odoo only use a small
    part of the psycogreen module that could be written directly in
    the odoo code. This commit reproduce the small function from
    psycogreen used in ODoo and remove all depencies from it.
    Also the copyright and license are honored and the documentation
    is updated accordingly.

    pypi pckage: https://pypi.python.org/pypi/psycogreen
    bitbucket repos: https://bitbucket.org/dvarrazzo/psycogreen/

Purpose: When uninstalling using the windows uninstaller, python and
nssm were left beyond. This fix removes the python and nssm dirs also.

Purpose: When installing postgresql under windows, the '+' character is
unallowed. This was creating a bug when using the windows installer the enterprise
version which derivate the install path from the version number.