PURPOSE

Add some improvements in mail gateway: remove private discussion, improve
bounce management, allow resetting bounce counters, improve automatic set or
reset of blacklists and ease mass mailing inheritance.

SPECIFICATIONS

Purpose: clean mail gateway code by cleaning message_route_verify

``message_route_verify`` is therefore renamed to ``_routing_check_route`` as
there are already some methods prefixed by routing, related to email routing.
This method is also made private as it has no real use for external world.

Parameters of this method are also cleaned. Various cleanings and code
improvements made some parameters not necessary anymore :

 * create_fallback: was always True;
 * update_author: was always True;
 * drop alias: no real use as aliases are used to compute the route and its
   access, dropping it at that point has no effect on code;
 * assert_model: renamed to raise_exception to be more coherent with the
   same kind of parameter used in Odoo;

LINKS

Related to task 1893155
Linked to PR #33340

PURPOSE

Add some improvements in mail gateway: remove private discussion, improve
bounce management, allow resetting bounce counters, improve automatic set or
reset of blacklists and ease mass mailing inheritance.

SPECIFICATIONS

Private discussion support in mail gateway means having incoming messages
not linked to a document. It means having a void model and res_id on related
messages.

Old private conversations in Odoo were implemented using messages not linked
to any document [1]. It was possible to send an email to some people through
the UX and they were able to answer it. Messages were not attached to any
document and model. There were some limitations to this feature, notably it was
limited to replies (no beginning of private discussion through mail gateway).
One way of doing it was through the use of res.users aliases [2]. There was
also a vaguely twitter-lite use of chatter on HR employee profiles linked
to users aliases, then removed with an explicit support of private
discussions [3].

It is not supported anymore since discussion between users is now done using
chat. Aliases on users have since been removed [4]. Contacting partners or
customers can be done on business documents or on channels. Simple email
discussion is not supported in Odoo as it is not the purpose of mailgateway.

This commit removes code related to private discussion in mail gateway and
some specific support in message_post method.

LINKS

Related to task 1893155
Linked to PR #33340

[1] History is a bit messy, see notably fd90140d and commits around
[2] User alias addition 052f2ace
[3] End of employee twitter-like and posting on users = private discussion 89896f32
[4] User alias removal 029d1baf

Partner / Contact model may hold valid mobile numbers in mobile or phone
fields.

LINKS

Task 1997464

closes odoo/odoo#35599

Signed-off-by: Thibault Delavallee (tde) <tde@openerp.com>

Scheduling a mailing creates a wizard with a m2o linking the mailing. While
this wizard is still alive and not garbage collected it is impossible to
delete the mailing. This commit fixes that.

LINKS

Task 1997464

To create an employee you have to give it a name

closes odoo/odoo#35556

Signed-off-by: Romain Libert (rli) <rli@odoo.com>

hr:
-rename btn 'generate badge ID' to 'generate'
-When the badge ID is set, replace the button Generate by "Print Badge"

hr_attendance:
-Rename menu 'Manage Attendances' to "Manager"
-Add a column "Work Hours" to attendee tree view
-Add a <br> after "Welcome to"
-add class text-muted on "or"
-remove class "text-muted" on "scan your badge
-Rename the primary btn into "Identify Manually"

Task-2040884
Closes: #35473

Signed-off-by: Romain Libert (rli) <rli@odoo.com>

When the IoT Box is not connected to the IoT Box, a hotspot would be
created to configure it. The name of this hotspot is printed on a
status receipt if a printer is connected. Previously, this ticket only
showed the default name of the hotspot, but this name will be different
if the user renamed the Box. We then read the name of the hotspot from
the config.

closes odoo/odoo#33095

Signed-off-by: pimodoo <pimodoo@users.noreply.github.com>

To use a kitchen printer, the user can only enter the IP of the Box and
it would be transformed into an URL with the protocol and port number.
This only supported HTTP so people that used HTTPS needed to enter the
full url to their Box.

Receipt are now printed as JPGs so receipts need to be formatted as
classic HTML to be rendered as images by Wkhtmltoimage.

There were two versions of the receipt for an order. The one in XML,
to be printed, and the one in HTML, that was displayed in the POS.
Since both of them are now HTML, we can remove one of them.

TaskID: 1939455

We communicate with receipt printers using the ESCPOS drivers.
By default, Star printers use the Star mode. This can be changed by
modifying the position of the DIP-Switches at the bottom of the
printer.

We provide a link to the documentation to the user if its printer is
not correctly configured.

ESCPOS printers are now supported as IoT Devices, just like any other
printer. We now transform the receipts to JPGs, transform these JPGs
into ESCPOS commands and send them via Cups, adding support for network
printers. Since we now print images, we can now print special
characters and therefore add support for other languages such as
Arabic.

The JPG is generated in the browser, with the help of html2canvas.

`hw_escpos` is left untouched to allow backward compatibility and
should be removed when v12 is no longer supported.

In the PoS, all the code for printing has been moved from ProxyDevice
to a separated JS file.

TaskID: 1939455

Printers should be usable by IoT Boxes connected to a community DB.

TaskID: 1939455

- Add support of "kanban_view_ref" on many2x fields:
For many2one fields, this specific kanban view will be opened when you click
on this field. Note that in desktop, the behavior stay unchanged:
'Search More' will open the tree view.
For many2many fields, this specific kanban view will be opened when you add
a record in mobile.

- Add support "selection_mode" in kanban views.
This boolean is set to true when you want to use a kaban view to
select a record instead of open a record.
"selection_mode" is now passed in qweb_context to allow developers
to use t-if='selection_mode' in kanban views to show or hide elements;
buttons, dropdowns, anchor tags are not necessary when selection_mode
is enabled. So those elements can be hidden based on this condition.
Useful when kanban view is opened from m2o in mobile environment.

Task ID : 1924779

closes odoo/odoo#30747

Signed-off-by: Xavier Dollé (xdo) <xdo@odoo.com>

Part of https://github.com/odoo/odoo/pull/34422


task-2026299

closes odoo/odoo#34422

Signed-off-by: Quentin Smetz (qsm) <qsm@odoo.com>

Part of https://github.com/odoo/odoo/pull/34422
task-2026299

Part of https://github.com/odoo/odoo/pull/34422
task-2026299

Review labels and alignements.

Part of https://github.com/odoo/odoo/pull/34422


task-2026299

Co-authored-by: qsm-odoo <qsm@odoo.com>

The text was gray on gray... it is now forced to white.

Part of https://github.com/odoo/odoo/pull/34422
task-2026299

This commit makes the UX of the optimize dialog clearer.

Part of https://github.com/odoo/odoo/pull/34422
task-2026299

* web, website_event, website_sale, sale_quotation_builder

Instead of an ugly danger-colored badge promoting "odoo", we now use
the official odoo logo. The code is also refactored to use more
consistent and translatable sentences without duplicated code.

Note: the odoo logo is added in the repo, downloaded from our official
brand assets page (https://www.odoo.com/page/brand-assets), in its
'tiny' version. The repo already contained multiple odoo logos but they
are quite old and should be replaced in a further update. Note: the svg
version was not able to be used as it contains external margins...

Part of https://github.com/odoo/odoo/pull/34422
task-2026299

Don't show "Not Available" as Line header when there is only one
attribute line on the product.template.

closes odoo/odoo#35586

Signed-off-by: Damien Bouvy (dbo) <dbo@odoo.com>

If we use a kanban view to select a record we want to hide those elements:
dropdown boxes, buttons, anchors, some widgets, kanban color.

When it was too much change and used the new attribute
"kanban_view_ref" to explicitly define which view to open in selection_mode.

When also had to create previously unexisting kanban for
fleet.vehicle.model to show name and brand.

Task ID : 1924779

This function was too long and it's now easier to override it
in enterprise

Task ID : 1924779

- many2one widget in mobile will open kanban view instead of listview when
records needs to be selected

- Add support of "kanban_view_ref" on many2x fields:
For many2one fields, this specific kanban view will be opened when you click
on this field. Note that in desktop, the behavior stay unchanged:
'Search More' will open the tree view.
For many2many fields, this specific kanban view will be opened when you add
a record in mobile.

- Add support "selection_mode" in kanban views.
This boolean is set to true when you want to use a kaban view to
select a record instead of open a record.
"selection_mode" is now passed in qweb_context to allow developers
to use t-if='selection_mode' in kanban views to show or hide elements;
buttons, dropdowns, anchor tags are not necessary when selection_mode
is enabled. So those elements can be hidden based on this condition.
Useful when kanban view is opened from m2o in mobile environment.

Task ID : 1924779

+ kinda allow multiple speakers by event track

task-2003209

closes odoo/odoo#34527

Signed-off-by: Quentin Smetz (qsm) <qsm@odoo.com>

* = web, website_blog, website_crm_partner_assign, website_event,
website_event_track, website_forum, website_hr_recruitment,
website_livechat, website_partner, website_profile, website_sale,
website_sale_delivery, website_slides

The published button name is a bit ambiguous, now it will clearly state
what it does with a new title : "Go to Website". The "Published",
"Unpublished" state is shown with the globe icon changing color
(green and red) and a title on the button.

Badge and Delivery don't have a website page, the button will then be
a publish/unpublish button in the backend.

task-2002435

closes odoo/odoo#34261

Signed-off-by: Xavier Morel (xmo) <xmo@odoo.com>

* set country VAT Label "CUIT" which is the country TAX id name  in
Argentina in order to used in reports and other places in Odoo. CUIT
mean "Código Único de Identificación Tributaria",

* update address format of the country.

* Use the state name instead of the state code: The address for the
company and partner was showing the state code (defined by ISO) but
this one are not the ones know for the common use. In order to avoid
errors we use the state name instead of the state code.

* Also change the order of the city state and zip are shown in address
in order to match the address in Argentinain "way".

closes odoo/odoo#34961

Signed-off-by: Josse Colpaert <jco@openerp.com>

closes odoo/odoo#35218

Signed-off-by: Josse Colpaert <jco@openerp.com>

Immediate transfer (no reservation, auto-confirmation, etc) should be
the default mode when creating manually a picking. The rationale is that
"the user wants to quickly encode stuff" and "it's better for the
onboarding".

As the default mode was already changed back to "planned transfer" because
users complained, this time we adapted the code so that the default mode
could be changed in python.

- re-order the imports of stock_picking.py.
- made all links to the picking from the picking type go through
_get_action (it wasn't the case for ready).
- adapt the context in the xml so that they are parse-able by
literal_eval.
- remove three actions that weren't used anymore.
- the user can create an ir config "stock.no_default_immediate_tranfer"
fill it with anything to get back the planned mode.

task-2043846

closes odoo/odoo#35550

Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>

Before this commit, the calendar popover was opened before the popover
widget was ready.  This is not usually the way it is done in odoo.

closes odoo/odoo#31874

Signed-off-by: Géry Debongnie (ged) <ged@openerp.com>

Task 1919926

Improve design and introducing several usability improvements:
- Removed customization of an event card, just display event title.
- Added popover, popover consist of two sections:
    1) Show the title, date and time of an event. Date and time are
       automatically computed according to the user timing preferences,
       language and event duration. Can be hidden with hide_date/hide_time
       attribute respectively.
    2) Display all the fields specified inside the <calendar/> element.
       fields can be specified with a widget and its options.
       e.g. <field name="name" string="Custom Name" widget="char" options="{}"/>
- Show avatar in popover for filters.
- Removed hide sidebar feature.
- Increase readability using a better color selection.
- Better UI in mobile.

And, Adapted test cases

Task 1919926

Co-authored-by: jat-odoo <jat@openerp.com>

The customers were removed from the invoice list view in
https://github.com/odoo/odoo/commit/317802d69e6236a43b2249b38d2f352813644f20



This was probably because the name of the variables
invoice_vendor_display_name was missleading as it was only for vendors
beofre but also for customers now. So this commit also renames related
variables.
While we are at renaming things, I also renamed the type in variables
supsense -> suspense.

closes odoo/odoo#35531

Signed-off-by: Laurent Smet <smetl@users.noreply.github.com>

Before this commit, when you duplicate a validated inventory, the new
one has the inventory lines of the original one.
Now, the duplicate inventory is created without inventory lines.

Task #2043851

closes odoo/odoo#35402

Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>

New search filter to display of inventory lines with `difference_qty`
(diff. between `theoretical_qty` and `product_qty`) different than zero.

Task #2043851

Add a button in the inventory adjustment lines view to update the
`theoretical_qty`. This button appears beside the On Hand quantity when
this quantity is outdated.

Note: it's not possible to define explicitly width of non-field column,
so we cannot define width of button's column. The hack is to constrain
width of other columns to manage a little space to display the button.

Task #2043851

On Inventory Adjustment lines view:
    - Changes some fields name...
    - The column Inventory Date has been moved between Location and
      Lot/Serial Number.
    - The columns Lot/Serial Number, On Hand, Difference, UoM and
      Inventory Date are now optional.
      Only Inventory Date is hide by default.

Task #2043851